DSE710 Generator Manual Auto Start Control Modules Electronics Controller Description
Basic Details
Part Name: Controller
OEM Part Number: DSE710
Cross Reference: Deep Sea DSE710
Specification
DC Supply:
8.0V to 35V Continuous.
Cranking Dropouts:
Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
Typical Standby Current:
145mA at 12V. 150mA at 24V
Max. Operating Current:
180mA at 12V. 190mA at 24V
Alternator Input Range:
Single phase 2 wire system 35V AC - 277V AC (ph-N) (+20%)
3Phase 4Wire System 35V AC - 277V AC (ph-N) 3 Phase 4wire (+20%)
(Must be at least 15V during engine cranking)
Alternator Input Frequency:
50Hz - 60 Hz at rated engine speed
Start Output:
2.4 Amp DC at supply voltage.
Fuel Output:
2.4 Amp DC at supply voltage.
Auxiliary Outputs:
1.2 Amp DC at supply voltage.
Dimensions:
209mm x 146mm (8.23” x 5.75”)
Panel cut-out:
182mm x 137mm (7.17” x 5.39”) Maximum panel thickness – 8mm (0.3”)
Charge Fail / Excitation Range:
12 Volts nominal = 8 Volts Charge fail
24 Volts nominal = 16 Volts Charge fail
Current Transformer Specification:
5A 0.5VA secondary winding
Operating Temperature Range -30°C to +70°C
Electromagnetic Compatibility:
BS EN 50081-2 EMC Generic Emission Standard (Industrial)
BS EN 50082-2 EMC Generic Immunity Standard (Industrial)
Electrical Safety:
BS EN 60950 Safety of I.T. equipment, including electrical business equipment.
Cold Temperature:
BS EN 60068-2-1 to –30°C
Hot Temperature:
BS EN 60068-2-2 to +70°C
Humidity:
BS2011-2-1 to 93% RH @ 40°C for 48 Hours
Vibration:
BS EN60068-2-6
10 sweeps at 1 octave/minute in each of 3 major axes.
5Hz to 8Hz @ +/-7.5mm constant displacement
8Hz to 500Hz @ 2gn constant acceleration
Shock:
BS EN 60068-2-27
3 Half sine shocks in each of 3 major axes
15gn amplitude, 11mS duration
Applicable Standards:
Compliant with BS EN 60950 Low Voltage Directive
Compliant with BS EN 50081-2: 1992 EMC Directive
Compliant with BS EN 61000-6-4: 2000 EMC Directive
Part Photos
Fast and Safe Delivery
You can choose the delivery term which is appropriate for you.
More Related Generator Controller
High-Quality generator controller used for Cummins, Deep Sea, FG Wilson, Monicon, ComAp and more.
More Generator Set Parts
You can find many generator set parts on our website. Meanwhile you can also contact us with your part number and we will check for you. Welcome to make inquiry to us directly.